Postdoc in piezoelectric thin films for micro- and nano-electromechanics

2 weeks ago

Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

Are you passionate about material science and have an innovative mindset?

Are you passionate about microelectromechanical systems?

If you are establishing your career as a scientist and looking for the best possible foundation for fulfilling your dreams and ambitions, it is right in front of you. At DTU Energy, we continuously strive for innovative energy solutions and are now looking for a postdoc to be a part of new, exciting research. Partially funded by the European Commission, we will work on new electromechanically functional materials for micro- and nano-electromechanical systems (MEMS and NEMS).

Prof. Vincenzo Esposito leads the project in the framework of a dynamic team in the Functional Oxides section. The FOX team possesses excellent competencies and the most advanced investigation tools for advanced functional materials.

Responsibilities and qualifications
The project aims to fabricate nanometric material, including nanostructured Nitrides and Oxides, 2D materials, and heterostructures for high-frequency applications. State-of-the-art physical vapor deposition methods (PLD and Sputtering) and laser interferometry are available for the fabrication and characterization of the devices.

Your overall focus will be strengthening the department's material science competencies for new energy technologies. You will work with colleagues nearby and academic and industrial partners in Denmark and abroad. Your primary tasks will be to:

  • Experimental set-up: develop a motorized system to deposit the thin films.
  • Chemical synthesis: fabricate ceramic targets for thin film deposition using the solid-state reaction and similar chemical methods.
  • PVD deposition: assemble the materials using advanced techniques, such as pulsed laser deposition (PLD) and radio frequency magnetron sputtering (RFMS).
  • Characterization: characterize the nanostructures using X-ray diffraction (XRD) and electron microscopy techniques.
  • Electrochemical characterization: characterize the deposited thin films by various electrochemical methods, including AC and DC techniques.
  • Electromechanical: use laser interferometry and optical probes to characterize the electromechanical response of the thin films on the polymeric substrates.
  • Test the device for biomedical applications with reference fluids.
  • Manage the project and support the coordinator in reporting to the EU Commission.

Other characterization methods at various synchrotron facilities in the EU will be adopted throughout the project.

We need a collaborator with the following skills and qualifications

  • A PhD degree in chemistry, physics, materials science, engineering, or similar.
  • Good communication skills in English, both written and spoken.
  • The ability to work independently with a strong drive to plan and carry out complicated tasks.
  • Interest in contributing positively to a new research group with a collaborative and diverse culture.
  • A creative mindset for solving problems and identifying new directions and opportunities in your project.

We also value experience with:

  • Experience with ferroelectrics.
  • PVD of ferroelectric metal oxides and/or oxygen ionic conductors.
  • Experience with defective metal oxides and nanomaterials.
  • Electrochemical characterization techniques (impedance spectroscopy, DC methods, and cyclic voltammetry).
  • Characterization of materials by X-ray diffraction, Scanning electron microscopy, and Atomic force microscopy.
  • Project management competencies.
  • XPS, Raman spectroscopy, and other spectroscopic methods.

We offer
DTU is a leading technical university globally recognized for the excellence of its research, education, innovation and scientific advice. We offer a rewarding and challenging job in an international environment. We strive for academic excellence in an environment characterized by collegial respect and academic freedom tempered by responsibility.

Salary and terms of employment
The appointment will be based on the collective agreement with the Danish Confederation of Professional Associations. The allowance will be agreed upon with the relevant union.

The period of employment is 1 year. The position is a full-time position.

Application procedure
Your complete online application must be submitted no later than 13 April 2025 (23:59 Danish time) .

Applications must be submitted as one PDF file containing all materials to be given consideration. To apply, please open the link "Apply now", fill out the online application form, and attach all your materials in English in one PDF file . The file must include:

  • Application (cover letter)
  • CV
  • Academic Diplomas (MSc/PhD – in English)
  • List of publications
  • Scientific highlights
  • List of references (at least two)

Applications received after the deadline will not be considered.

All interested candidates irrespective of age, gender, disability, race, religion or ethnic background are encouraged to apply. As DTU works with research in critical technology, which is subject to special rules for security and export control, open-source background checks may be conducted on qualified candidates for the position.

#J-18808-Ljbffr

  • Postdoctoral Position in Piezoelectric Thin Films

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    We are looking for a talented scientist to join our research group at DTU Energy. As a postdoctoral researcher, you will contribute to the development of new materials and technologies for micro- and nano-electromechanical systems (MEMS and NEMS).Key ResponsibilitiesDesign and implement an experimental setup to deposit thin films.Develop a method for...

  • Postdoctoral Position in Piezoelectric Materials

    1 week ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Job DescriptionWe are seeking a highly motivated Postdoc to work on new electromechanically functional materials for micro- and nano-electromechanical systems (MEMS and NEMS). The project aims to fabricate nanometric material, including nanostructured Nitrides and Oxides, 2D materials, and heterostructures for high-frequency applications.Experimental set-up:...

  • Postdoc in Wafer-Scale Functional Oxide Thin Films for High-Efficiency Piezoelectric Applicatio

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    The Department of Energy Conversion and Storage at the Technical University of Denmark (DTU) is offering a postdoctoral research fellowship focused on engineering and characterizing functional oxide thin films for the next generation of high efficiency piezoelectric materials.The position is part of the recently funded national Villum project,...

  • Postdoc in Wafer-Scale Functional Oxide Thin Films for High-Efficiency Piezoelectric Applicatio

    7 days ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    The Department of Energy Conversion and Storage at the Technical University of Denmark (DTU) is offering a postdoctoral research fellowship focused on engineering and characterizing functional oxide thin films for the next generation of high efficiency piezoelectric materials. The position is part of the recently funded national Villum project,...

  • Thin Film Expert for Energy Applications

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    The Department of Energy Conversion and Storage at DTU is offering a postdoctoral research fellowship focused on engineering and characterizing functional oxide thin films for high-efficiency piezoelectric materials. As a Postdoctoral Researcher, you will work on growing functional oxide thin films, fabricating devices, and performing electromechanical...

  • Postdoctoral Researcher in Oxide Thin Films Engineering

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Job DescriptionWe are looking for a highly skilled researcher to join our team at DTU - Technical University of Denmark. The successful candidate will work on engineering large-area oxide thin-film materials on silicon and characterizing their electromechanical energy conversion properties.Key ResponsibilitiesDesign and optimize deposition conditions for...

  • Electromechanical Materials Researcher

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Welcome to DTU Energy, where we strive for innovative energy solutions. Our team is committed to developing new electromechanically functional materials for micro- and nano-electromechanical systems (MEMS and NEMS).Project OverviewWe are seeking a postdoctoral researcher to join our dynamic team in the Functional Oxides section. Prof. Vincenzo Esposito leads...

  • Piezoelectric Materials Scientist

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    The Department of Energy Conversion and Storage at DTU is embarking on an exciting research project focused on developing high-efficiency piezoelectric materials. As a Postdoctoral Researcher, you will play a key role in engineering and characterizing functional oxide thin films for next-generation piezoelectric applications.The SYMTEC project, funded by the...

  • Functional Oxide Thin Film Research Fellow

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Oxide Thin Films for Energy ConversionAt DTU, we are exploring new ways to engineer functional oxide thin films for high-efficiency energy conversion applications. Our research focuses on understanding the relationship between defect dynamics, crystal symmetry, and electromechanical response in intrinsically centrosymmetric oxides.Role and ResponsibilitiesWe...

  • Materials Scientist for High-Efficiency Piezoelectric Materials

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    About the RoleWe are seeking a highly talented and self-motivated researcher to join our team at DTU - Technical University of Denmark. The successful candidate will work on engineering large-area oxide thin-film materials on silicon and characterizing their electromechanical energy conversion properties.Project OverviewThe project focuses on discovering new...

  • Senior Researcher in Nanostructured Thin Films

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    **Research OpportunityWe are seeking a highly skilled researcher to join our team at DTU Energy, where we strive for innovative energy solutions. The ideal candidate will have a strong background in chemistry, physics, materials science, engineering, or a related field, and will be able to work independently with a strong drive to plan and carry out...

  • Postdoctoral Research Fellow in Advanced Piezoelectric Materials

    7 days ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    About the RoleWe are seeking a highly motivated postdoctoral research fellow to join our team at DTU - Technical University of Denmark. As part of the SYMTEC project, you will focus on engineering and characterizing functional oxide thin films for high-efficiency piezoelectric materials.The successful candidate will work on growing functional oxide thin...

  • Postdoctoral Researcher in Functional Materials

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Job DescriptionThe Technical University of Denmark (DTU) is seeking a highly skilled postdoctoral researcher to join its team in the Department of Energy. The successful candidate will be part of a dynamic project focused on developing new electromechanically functional materials for micro- and nano-electromechanical systems (MEMS and NEMS).Responsibilities...

  • Research Scientist in Electromechanical Materials

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    **About the JobWe are seeking a highly skilled researcher to join our team at DTU Energy, where we strive for innovative energy solutions. The ideal candidate will have a strong background in chemistry, physics, materials science, engineering, or a related field.The project aims to develop new electromechanically functional materials for micro- and...

  • Thin Film Engineer for High-Efficiency Energy Conversion

    7 days ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Key ResponsibilitiesEstablish optimal deposition conditions of highly textured oxide films on Si using wafer-scale sputtering (also using pulsed laser deposition, PLD).Engineer new piezoelectric oxide thin films by controlling ionic defects.Investigate emergent piezoelectric effects in large-area CGO films on silicon.You will work closely with the research...

  • Wafer-Scale Functional Oxide Researcher

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    The Technical University of Denmark (DTU) is seeking a highly skilled Postdoctoral Researcher to join its Department of Energy Conversion and Storage. The successful candidate will be part of a cutting-edge research project focused on engineering and characterizing functional oxide thin films for high-efficiency piezoelectric materials.The project aims to...

  • Postdoctoral Researcher in Advanced Materials Engineering

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    The Technical University of Denmark (DTU) is seeking a highly skilled Postdoctoral Researcher to join its Department of Energy Conversion and Storage. The successful candidate will be part of a cutting-edge research project focused on engineering and characterizing functional oxide thin films for high-efficiency piezoelectric materials.The project, titled...

  • PhD scholarship in High-Efficiency Energy Conversion Developing New Piezoelectric and Pyroelect

    7 days ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Do you want to contribute to the discovery of new piezoelectric and pyroelectric materials for the next-generation energy storage and electronic devices? We are seeking a highly talented, strongly self-motivated PhD candidate with an outstanding academic record for this emerging field of research. At DTU Energy, our research focuses on developing innovative...

  • Piezoelectric Material Engineer for Next Generation Energy Conversion

    2 weeks ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    Piezoelectric Materials ResearchWe are seeking a highly skilled researcher to join our team at DTU - Technical University of Denmark and contribute to our research efforts in piezoelectric materials. Our team focuses on understanding the fundamental principles underlying the behavior of piezoelectric materials, with the ultimate goal of developing new...

  • Materials Scientist for Next-Generation Piezoelectrics

    7 days ago

    Kongens Lyngby, Lyngby-Tårbæk Kommune, Denmark DTU - Technical University of Denmark Full time

    About the ProjectThe SYMTEC project aims to provide new directions for developing lead-free and silicon-compatible piezoelectric materials. This will be achieved by engineering functional defects in centrosymmetric oxide thin-film materials (e.g., doped ceria).The successful candidate will have the opportunity to work on cutting-edge research and contribute...